• Home
  • Forums
  • Register
  • Featured
  • Reviews
  • Guides
  • Contact

Gaming in Tight Spaces v2.0 – MAX11L (featuring Corsair and Gigabyte)


Posted by miahallen on 24 Sep 2010 / 24 Comments
Tweet



“Gaming in Tight Spaces” – Part Two

Last month I brought you part one in this series entitled “Gaming in Tight Spaces – mini-ITX (featuring Gigabyte, Silverstone, and Prolimatech)”.  In that article, I talked a bit about the history of mini-ITX and my fascination with it.  If you didn’t get a chance to look it over yet, feel free to check it out as I’ll be referencing it a lot in this article.

My goal with the original was to simply build a gaming PC in which I would be using on a regular basis.  I did not intend to write an article about the build.  But after receiving support from Gigabyte and Prolimatech, the build spawned the article and an in depth look at what sort of performance I could extract from a tiny system on a relatively small budget.

Well….I got the bug, as many might say, and my curiosity drove me to push the system to the next level.  I decided to name this new revision “MAX11L”, which represents the maximum amount of performance I could stuff into 11 liters of volume.  After writing the first article I received a lot of feedback, many users suggested a different case for the build to accommodate more/larger hardware.  One user even suggested a Thermaltake Lanbox at which I was rolling on the floor.

Those of you who know me know that I ride a motorcycle, and I really like the size of this SUGO SG05 case because it easily fits in my backpack along with a change of clothes, food, accessories etc…  It measures a very discreet (W) 222mm x (H) 176mm x (D) 276mm or 10.78L of volume.  In comparison, the Thermaltake Lanbox measures a monstrous (W) 300mm x (H) 280mm x (D) 430mm or 36.12L!!!  That means it’s more than three times the size.  There is no way that I could carry it in my backpack!  After doing a little more research on small form factor (SFF) cases, I started compiling a list of cases by size, which could be very informative for many of you.

Upgrades, upgrades, upgrades!

When I started planning out the upgrades for this build, I definitely wanted to try a quad core CPU.  I also wanted to upgrade the video card from the original 5850 to the more powerful 5870, and I had a Gigabyte HD 5870 Super Overclock edition left over from a past review.  I figured it would be the perfect candidate.  Since I was already nearing the theoretic limits of the stock 300W PSU, I figured that it would also be wise to upgrade to the new Silverstone ST45SF – 450W SFX power supply.

As I continued to inspect the space I had and develop a plan to take the system to its maximum potential, I kept coming back to cooling and overclocking improvements.  While I was quite impressed with the Prolimatech Samuel 17 used in the original article, I knew that there were more powerful options available.  One of the most popular options at the time was the Corsair H50, but I was put off by its sub-par performance in comparison to the top air coolers.  However, it would fit in this case, while the top air coolers would not.  So I began to brainstorm ways to fit it in.

About the same time, Corsair announced the newer H70, and as soon as I saw it, I knew that if I could squeeze it in then I had found a winner for this build.  I did figure out a way to shoehorn it in, but it did require the removal of my 3.5” HDD, and the relocation of the 2.5” SSD.  To replace the 3.5” drive I opted for the new Seagate Momentus XT Hybrid SSD/HDD.  Then I had to get creative with finding a place to mount the drives, but I’ll get to that later.

The last change was the memory.  With a Lynnfield based CPU, I had at my disposal the best memory controller available on the market today.  There was no way for me to tap that potential with the original OCZ Gold DDR3…so to push this system for the best performance possible, Corsair sent me a nice set of the PSC based Dominator GTX3 DIMMs.  They are rated for DDR3-2400 operation and should give a significant performance boost.

Continue on to page 2 for more of the build process… >>

Pages: 1 2 3 4 5 6 7 8

Written by miahallen

Well, I was playing with computers ever since my Dad got a Commodore 64 when I was 6 years old (1986), when I was 10 (1990) he bought a custom build 486DX33, and I was in love. Mostly back then I was just a kid playing games, but my fascination with computers had a start. Because I had no money of my own, I was stuck playing with my Dad's computers, and really couldn't "play" too much. So in 1998, the year I graduated, I spent some of my college savings to by a "computer for school", haha. It had two Voodoo2 12MB 3D accelerators in it, so you can imagine how much school work was done on it ;-) It had an AMD K6-233 that I had a really mild OC on, but my custom computer builder friend Aaron had done all the work. So I can't really take the credit there. My fascination with graphics just kept growing and growing over the years, and I was constantly in a struggle to keep my games looking as sharp and smooth as possible. OCing played a big role. My whole world was rocked in 2004 when I was deployed to Iraq as a US Army soldier. The whole year I was there I had a cheap IBM Thinkpad R40 with a 2GHz Celeron, 1GB DDR-333 RAM, a 60GB 4200RPM HDD, and ATI Radeon Mobility graphics (same technology as a 7000 series with only 16MB of memory). It started out rough as I was really into Command and Conquer Generals at the time, and the machine would only play the C&C slide show LOL. So, I downloaded PowerStrip, and OC'ed the GPU by 40%...amazingly, the game was playable! Things changed dramatically in 2007 when I met a guy named Matt while I was stationed in Japan. He introduced me to www.ocforums.com, and the "Benchmarking Team" there. I had not had much interest in benchmarking previously, I always though of myself as more practical. But, I thought I'd play along and I joined the team. My first introduction to an actual competition was was is "The Raptor Pit", "Forum Warz 2008" in the spring of 2008. I was running a Q6600 and an 8800GTX. With air cooling I was able to bench my Q6600 at over 4GHz, and tore up the competition in my class. Overall OCF won the Forum War in 2007, Winter and Summer of 2008, and 2009...that means five in a row. I was not part of the first one in 2007, but the four since then, I have participated in. After winning the 2008 Winter and Summer Warz, Tom's Hardware Guide announced they were looking for nominations for individuals to compete in their first ever international overclocking competition, called "Overdrive". I was nominated, and chosen to compete in the North American semi-finals in Los Angeles in November 2008. I was placed on "Team IRONMODS" as they only had two guys, yet three man teams were allowed. We won the semi-finals in LA, and our prize was a trip to Paris the following month, to compete with the best in the world. The following month, Ton, Jake, and myself flew to Paris as "Team USA" to face off against the best from Taiwan, France, Germany, and Italy. It was a very intense competition, but after two heated days of battle (16 hours of benching), we emerged the victors. Amidst our celebration, Ton and Jake officially invited me to join "Team IRONMODS" on a permanent basis, and I graciously accepted. Ton, aka "TiTON", is a world renown case moder, and is also very well known for some of the AMD overclocking he has done. Jake, aka "CPT.Planet", is a genius overclocker, and a really fun guy. The team has a great synergy when working together, we really have complementary styles. After winning the world championship in December 2008 things were a bit quite for a couple months, then in the spring of 2009 I received an invitation to the 2nd annual Gigabyte Open Overclocking Championship "GOOC". I would compete in the North American semi-final in LA, where the winner would win a ticket to the world championship in Taipei Taiwan during CES in June 2009. The competition was tough with 14 of the best from North America gathering for a 1 on 1 competition of OCing. But once again, I completed the competition well, and rose above the others. I won 1st place and the trip to the world finals in Taipei. My luck ran dry in Taipei where I started off with a bad motherboard, and went through 5 more during the course of the competition due to various reasons. Despite the poor finish in Taipei, I have high hopes to redeem myself next year.

24 Comments


Almost there, just need a GPU... - HEXUS.community discussion forums
2 yearss ago



[...] Re: Almost there, just need a GPU… Originally Posted by dfour Yeah but would it fit in the case?? My 6950 was longer than my 5850 card and it has rear facing pci-e power ports as well. Oh! Didn't read the OP properly, sorry. Yeah I'm pretty sure the 6950 doesn't fit into a Silverstone SG05. Sorry about that. Check out this [...]

Craig
2 yearss ago



I just bought this case and love the size but I have real difficulty putting the top back on now I’ve installed all my components, does any one have any tips on putting it back on.

miahallen
2 yearss ago



I would imagine it can, but I won’t know for sure another month or so.

CeeeFour
2 yearss ago



Awesome. Can the same mod to accomodate the 10.5in card be done on sugo06? Thanks!

[Global] MSI GTX 580 - $460 shipped - Page 2 - Overclock.net - Overclocking.net
2 yearss ago



[...] the OP. ^^^ This __________________ My HWBot profile Intel 3-Step Overclocking Guide Heat MAX11L – mini-ITX gaming rig FTW! [...]

sg05 build... little advice plz - Overclock.net - Overclocking.net
2 yearss ago



[...] i5 and 480 combo in an SG05 with the 450w psu. as the others have noted, its a strong power supply. http://www.techreaction.net/2010/09/…-and-gigabyte/ __________________ Cooler Master ATCS 840 Owners Club Nvidia 3D Vision Club [...]

Smallest form factor case for a gtx 480? - Overclock.net - Overclocking.net
2 yearss ago



[...] put one in a Silverstone SG05. that's probably as small as your gonna get. http://www.techreaction.net/2010/09/…-and-gigabyte/ __________________ Cooler Master ATCS 840 Owners Club Nvidia 3D Vision Club [...]

i3 540 overclock help - Overclock.net - Overclocking.net
2 yearss ago



[...] miahallen's Power Density Challenge My HWBot profile Intel 3-Step Overclocking Guide Heat MAX11L – mini-ITX gaming rig FTW! [...]

Mr MAn
3 yearss ago



Do you get restarts on this build?

CyberpowerUK
3 yearss ago



I did a system in the SG-07 with an Asetek LCLC 120 (a.k.a. H50) since it was announced I’ve though of upgrading it to the H70. Would it fit with both fans installed?

MAX11L - finished - Page 2 - Overclock.net - Overclocking.net
3 yearss ago



[...] Ace 102 CFM beast, airflow isn't a problem, temps are great! Check my full performance review here: http://www.techreaction.net/2010/09/…-and-gigabyte/ [...]

miahallen
3 yearss ago



Thanks for all the nice comments guys :)

Colin
3 yearss ago



This and the first part of this build blog is superb so many thanks for posting it and taking the time to do so. I am building my first SFF based upon your specs or as close as I could get in the UK :) Hopefully will go well…

My First SFF Gaming Machine - questions on cooling / size - Overclock.net - Overclocking.net
3 yearss ago



[...] be fine If you haven't seen my update to the blog you linked….you should check it out too http://www.techreaction.net/2010/09/…-and-gigabyte/ __________________ OCN Power Density Challenge My HWBot profile Intel 3-Step Overclocking [...]

Shane Clayton
3 yearss ago



Everything about this article is fantastic. Simple as that.

Power Density Challenge - points per liter! - Overclock.net - Overclocking.net
3 yearss ago



[...] OCN Official Power Density Club My HWBot profile Intel 3-Step Overclocking Guide Heat MAX11L – mini-ITX gaming rig FTW! [...]

Club for those with beastly mATX/ITX rigs. - Page 116 - Overclock.net - Overclocking.net
3 yearss ago



[...] it's possible, but chances are unlikely I did a full power consumption analysis in my article http://www.techreaction.net/2010/09/…-and-gigabyte/ __________________ OCN Official Power Density Club My HWBot profile Intel 3-Step [...]

mITX for the hardcore gamer, possible? - Page 3 - Overclock.net - Overclocking.net
3 yearss ago



[...] OCN Official Power Density Club My HWBot profile Intel 3-Step Overclocking Guide Heat MAX11L – mini-ITX gaming rig FTW! [...]

Overclocking i5-760 - Page 2 - Overclock.net - Overclocking.net
3 yearss ago



[...] a full performance assessment of the system, and I was very impressed, you can read my review here: http://www.techreaction.net/2010/09/…-and-gigabyte/ [...]

Yellowbeard
3 yearss ago



Man, that is a sweet rig Miah! Thanks for including us in the build.

ls
3 yearss ago



With a little modification i managed to squeeze in an H50 and keep the optical tray with a slot load. Also had some time to spray the insides black. Otherwise your build is as nice as mine!

[Sammelthread] Silverstone Sugo 05/06 ITX - Der neue GameCube? (Bitte 1. Post lesen) Teil III - Seite 30 - Forum de Luxx
3 yearss ago



[...] [...]

Discuss: Official mini-ITX Discussion Thread! - Page 314 - VRForums - Singapore IT & Lifestyle Central
3 yearss ago



[...] (permalink) check out this sg05, h70, gtx 480 build Gaming in Tight Spaces v2.0 – MAX11L (featuring Corsair and Gigabyte) | TechREACTION i5-750@4ghz Corsair H50 w/ 2 Scythe Gentle Typhoon 1850rpm in push pull MSI P55 GD65 Team Xtreem [...]

Gaming in Tight Spaces - MAX11L (featuring Gigbayte and Corsair)
3 yearss ago



[...] which represents the maximum amount of performance I could stuff into 11 liters of volume. Continue reading here! Intel CPU buyer's guide 3 Step Overclocking Guide – Bloomfield & Gulftown 3 Step [...]


Leave a Reply

  Cancel Reply


subscribers

0

followers

Visit the TechReaction.net Forums
  • Sponsor


  • Find us on Facebook

  • Twitter

    • NEW! 4 Useful Apps to Rescue You from Sticky Situations: Ever experienced a situation that went south so quick... http://t.co/oqZzBNWbIB
    • AMD’s next-gen APUs to boost performance with unified memory http://t.co/b6oWutJoFJ
    • LadySwoop PMS http://t.co/XlE6Ej5sl9
    • NEW! alienvibes W601 2.2 Speakers: Today we got on our review table the alienvibes W601 2.2 channel speaker sy... http://t.co/Ke1BuzliMV
    • I created group Eastern North Carolins Business n' Industry on Linkedin.: http://t.co/3jTTofpmyo
  • Sponsors

  • Popular Categories

    Adapters AMD Apple ATI Audio Cases Cloud Computing Contests Cooling Displays DVD Events Extreme Featured Gaming Guides HTPC Hyper-v Intel Interviews Memory & Storage Microsoft Mobile Modding Motherboards & Chipsets Networking Nvidia Overclocking Peripherals Portable Devices Power Supplies Previews Processors PS3 PSP Reviews Site News Software Storage Uncategorized Video Video Cards Web XBOX 360
  • Categories

    • AMD (120)
    • Apple (9)
    • ATI (43)
    • Audio (40)
    • Cases (128)
    • Cloud Computing (3)
    • Contests (2)
    • Cooling (124)
    • Displays (2)
    • Events (23)
    • Extreme (54)
    • Featured (130)
    • Gaming (51)
      • PS3 (3)
      • PSP (3)
    • Guides (31)
    • HTPC (15)
    • Hyper-v (1)
    • Intel (103)
    • Interviews (1)
    • Memory & Storage (109)
    • Microsoft (14)
    • Mobile (5)
    • Modding (32)
    • Motherboards & Chipsets (82)
    • Networking (6)
    • Nvidia (42)
    • Overclocking (159)
    • Peripherals (104)
    • Portable Devices (36)
    • Power Supplies (14)
    • Previews (23)
    • Processors (64)
    • Reviews (365)
    • Site News (40)
    • Software (19)
    • Storage (5)
      • Adapters (3)
    • Uncategorized (58)
      • DVD (2)
    • Video (5)
    • Video Cards (51)
    • Web (2)
    • XBOX 360 (3)



Copyright © 2012 TechReaction.net - PC Hardware Reviews, Guides, How-To's and News.